450g of Taulmans T-Glase Black filament at 1.75mm Strength - This is part of Taulman3D's industrial line and is therefore required to be strong. T-glase produces exceptionally strong prints both in layer bondage and adjacent forces. Temperature - Optimum temperature is about 212c to 224C, but will print down to 207C and up to about 255C. FDA approved – t-glase is specifically made of FDA approved polymers for direct food contact/containers. This includes cups and other liquid storage parts as well as utensils. Environmental - While t-glase is not biodegradable like PLA, it is a material that’s considered 100% reclaimable. Thus the new “struders” that convert failed prints back to usable line work perfectly with t-glase. If you have a “struder”, you can actually mix in 12% of the total weight in discarded clear water bottles. Clarity – like 645 nylon, t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts. Shrinkage - Very low shrinkage makes printing large flat surfaces a breeze. And it easily prints to acrylic, glass, Kapton and other platforms. Bridging - Those of us that have printed with acrylics and polycarbonates are always envious of their bridging capabilities due to glass temperature. And the new t-glase is very impressive at bridging. Fumes - Unlike some lines, there are no odors or fumes when 3D Printing with t-glase.
Taulman T-Glase Black
- Net Weight: 580g Material Weight: 450g Size: 1.75mm +/- 0.03mm Printing Temperature: 235-260°C Glass Transition Temperature: 68.2°C Heat Bed Required: Yes